The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Guns International #: 103383649
Seller's Inventory #: FB01544
Synopsis:
Exceptional S&W Model 27-2 .357 Magnum revolver with the scarce/desirable 3.5-inch barrel, adjustable sights, near NIB in matching box with full complement of literature and usual cleaning implements. A wonderful example that would be very, very difficult to upgrade!.
Description:
Standard configuration S&W Model 27-2 .357 Magnum revolver manufactured between 1969-1972, SN: S298405, with 3.5" barrel having ramp front sight and fully adjustable rear sight. Full serial number S298405 on inner frame and butt; 298405 inner surface right grip. Crane marked with assembly number 83860, the same number repeated on left frame under grips. Left side of barrel marked "SMITH & WESSON" while right side of barrel is stamped "S. & W. 357 MAGNUM", the sideplate marked with the usual S&W logo. Right side of frame stamped "MADE IN U.S.A.", "MARCAS REGISTRADAS", "SMITH & WESSON", and "SPRINGFIELD, MASS." markings. Checkered wooden grips featuring S&W medallions. Complete with original, matching factory box, details on end label, containing RIP, instruction manual for ".357 MAGNUM REVOLVER MODEL No. 27", holster brochure, knife catalog, warrantee, Smith & Wesson ammunition card, and plastic sleeve with cleaning implements. The Model 27 was first produced in 1935, officially became the numbered Model 27 in 1957, and is built on S&W's large N-frame, noted for its durability and reliability.
Condition:
Beautiful 99+ percent bright original salt blue, the cylinder ring barely breaking through the blue, no case head imprints on the recoil shield. Vivid case colors on small parts. Comparable condition grips with no discernible handling marks. Mirror bright bore. EXC box with only a few minor scuffs. Nearly impossible to upgrade short of NIB!
|
Click Photo to Enlarge
|
Guns International #: 103383649
Category - Smith & Wesson Revolvers - Model 27
- .357 Magnum Revolvers
S&W 27-2, .357 Mag Revolver, 3.5" Bbl, Boxed, S298405, FB01544
Description: Synopsis: Exceptional S&W Model 27-2 .357 Magnum revolver with the scarce/desirable 3.5-inch barrel, adjustable sights, near NIB in matching box with full complement of literature and usual cleaning implements. A wonderful example that would be very, very difficult to upgrade!. Description: Standard configuration S&W Model 27-2 .357 Magnum revolver manufactured between 1969-1972, SN: S298405, with 3.5" barrel having ramp front sight and fully adjustable rear sight. Full serial number S298405 on inner frame and butt; 298405 inner surface right grip. Crane marked with assembly number 83860, the same number repeated on left frame under grips. Left side of barrel marked "SMITH & WESSON" while right side of barrel is stamped "S. & W. 357 MAGNUM", the sideplate marked with the usual S&W logo. Right side of frame stamped "MADE IN U.S.A.", "MARCAS REGISTRADAS", "SMITH & WESSON", and "SPRINGFIELD, MASS." markings. Checkered wooden grips featuring S&W medallions. Complete with original, matching factory box, details on end label, containing RIP, instruction manual for ".357 MAGNUM REVOLVER MODEL No. 27", holster brochure, knife catalog, warrantee, Smith & Wesson ammunition card, and plastic sleeve with cleaning implements. The Model 27 was first produced in 1935, officially became the numbered Model 27 in 1957, and is built on S&W's large N-frame, noted for its durability and reliability. Condition: Beautiful 99+ percent bright original salt blue, the cylinder ring barely breaking through the blue, no case head imprints on the recoil shield. Vivid case colors on small parts. Comparable condition grips with no discernible handling marks. Mirror bright bore. EXC box with only a few minor scuffs. Nearly impossible to upgrade short of NIB! Manufacturer: S&W Model: 27-2 Serial Number: S298405 Caliber Info: 357 Mag. Condition: EXC Price: $3,995.00 Contact Seller |
Guns International #: 103383649
Seller's Inventory #: FB01544
Synopsis:
Exceptional S&W Model 27-2 .357 Magnum revolver with the scarce/desirable 3.5-inch barrel, adjustable sights, near NIB in matching box with full complement of literature and usual cleaning implements. A wonderful example that would be very, very difficult to upgrade!.
Description:
Standard configuration S&W Model 27-2 .357 Magnum revolver manufactured between 1969-1972, SN: S298405, with 3.5" barrel having ramp front sight and fully adjustable rear sight. Full serial number S298405 on inner frame and butt; 298405 inner surface right grip. Crane marked with assembly number 83860, the same number repeated on left frame under grips. Left side of barrel marked "SMITH & WESSON" while right side of barrel is stamped "S. & W. 357 MAGNUM", the sideplate marked with the usual S&W logo. Right side of frame stamped "MADE IN U.S.A.", "MARCAS REGISTRADAS", "SMITH & WESSON", and "SPRINGFIELD, MASS." markings. Checkered wooden grips featuring S&W medallions. Complete with original, matching factory box, details on end label, containing RIP, instruction manual for ".357 MAGNUM REVOLVER MODEL No. 27", holster brochure, knife catalog, warrantee, Smith & Wesson ammunition card, and plastic sleeve with cleaning implements. The Model 27 was first produced in 1935, officially became the numbered Model 27 in 1957, and is built on S&W's large N-frame, noted for its durability and reliability.
Condition:
Beautiful 99+ percent bright original salt blue, the cylinder ring barely breaking through the blue, no case head imprints on the recoil shield. Vivid case colors on small parts. Comparable condition grips with no discernible handling marks. Mirror bright bore. EXC box with only a few minor scuffs. Nearly impossible to upgrade short of NIB!
Guns International #: 103383649
Seller's Inventory #: FB01544
Guns International #: 103383649
Seller's Inventory #: FB01544
Synopsis:
Exceptional S&W Model 27-2 .357 Magnum revolver with the scarce/desirable 3.5-inch barrel, adjustable sights, near NIB in matching box with full complement of literature and usual cleaning implements. A wonderful example that would be very, very difficult to upgrade!.
Description:
Standard configuration S&W Model 27-2 .357 Magnum revolver manufactured between 1969-1972, SN: S298405, with 3.5" barrel having ramp front sight and fully adjustable rear sight. Full serial number S298405 on inner frame and butt; 298405 inner surface right grip. Crane marked with assembly number 83860, the same number repeated on left frame under grips. Left side of barrel marked "SMITH & WESSON" while right side of barrel is stamped "S. & W. 357 MAGNUM", the sideplate marked with the usual S&W logo. Right side of frame stamped "MADE IN U.S.A.", "MARCAS REGISTRADAS", "SMITH & WESSON", and "SPRINGFIELD, MASS." markings. Checkered wooden grips featuring S&W medallions. Complete with original, matching factory box, details on end label, containing RIP, instruction manual for ".357 MAGNUM REVOLVER MODEL No. 27", holster brochure, knife catalog, warrantee, Smith & Wesson ammunition card, and plastic sleeve with cleaning implements. The Model 27 was first produced in 1935, officially became the numbered Model 27 in 1957, and is built on S&W's large N-frame, noted for its durability and reliability.
Condition:
Beautiful 99+ percent bright original salt blue, the cylinder ring barely breaking through the blue, no case head imprints on the recoil shield. Vivid case colors on small parts. Comparable condition grips with no discernible handling marks. Mirror bright bore. EXC box with only a few minor scuffs. Nearly impossible to upgrade short of NIB!
to Favorites